10

MAXMEYER® coatings provides you with range of stoppers, cleaners and additives all designed to make the painter's job easier and ensure a high quality repair every time.

Products

  • 1.975.2341 Antisilicon Additive

    Product Code: 1.975.2341

    AD 2341 contains specific surface coating modifiers and is designed for use when fisheye contamination of topcoat becomes evident.

  • 1.977.3302 Mat 3

    Product Code: 1.977.3302

    Matting paste based on acrylic resins that reduces the gloss level of MaxMeyer Topcoats.

  • 1K Plastiprimer

    Product Code: 1.823.1500

    The 1K Plastiprimer is a ready to use adhesion promoting plastic primer, which is designed for use on all bare plastics. Only one full light coat is necessary to modify the plastic surface, allowing topcoat adhesion. 

     

    Features and Benefits

    1. Aerosol format available: 1.823.1600 offers the same easy to use product without the need to apply through a spray gun. Cutting out the need for spray gun cleaning.
    2. Ready-to-use. The Plastiprimer comes in a ready for use format, which can be applied straight onto plastics. Increasing Bodyshop efficiency and time saving.
    3. Supplied in 1L Tin and Applied Through a Spraygun: Very economical application on larger areas. Saving product and money for the Bodyshop.

     

  • 1K Plastiprimer Aerosol

    Product Code: 1.880.1600

    The 1K aerosol primer is designed for use on all bare plastics for spot priming breakthroughs on plastic repairs. One full coat is all that is needed to modify the plastic surface allowing total topcoat adhesion. The aerosol format cuts out the need for spraygun cleaning in the bodyshop. 

    Use it when painting a small cleaned bare plastic surface. 

     

    Features and Benefits

    1. The Aerosol format makes the product easy to use, as no spray gun is needed for application, and this cuts out the need for spray gun cleaning. 

     

  • Antistatic Cleaning Agent

    Product Code: 1.931.4000

    Use the Antistatic Agent before you apply any material to the plastic. Designed to reduce and remove static electricity which accumulates on plastic vehicle parts. Easily removes any trace residues of dust, dirt, grease, oil, silicone, waxes and other contaminating agents present on plastic materials without cutting into these solvent sensitive parts. Simply wipe it onto the substrate and allow to dry.

     

    Features and Benefits

    1. Provides easy removal of contaminating agents: Reduced process time and eliminates product contamination.

     

  • MAXMEYER® Prep Paste 2400

    Product Code: 1.972.2400

    Comprehensive ancillary range to complement and enhance the performance of the MaxMeyer paint system, from preparation to final repair. Prep Paste 2400 is a water soluble abrasive product which can be applied with either an abrasive pad or a fine cloth to provide various abrasion levels as required. Prep Paste 2400 ensures an even key to panels prior to topcoating.

     

    Features and Benefits

    1. Easy and quick application: Easy to apply and easily removed from the panel leaving no residue marks.
    2. Simple to use: Simple and quick solution for preparing panels.

     

  • MAXMEYER® Spot Blender Aerosol 5411

    Product Code: 1.912.5411

    Ideal for use on spot, panel and multi panel repairs the new Spot Blenders 1.912.5411 and 1.912.5421 from MaxMeyer melts overspray on repair edges to deliver a market leading final appearance with no visible fade-out edge with minimal polishing required.

     

    Features and Benefits

    1. Easy to use with very good wetting of the surface and fast flash off: Painter speed and confidence in
      the repair process
    2. Excellent melting of the overspray edge: Minimal polishing required, increasing productivity
    3. Ready-for-use: Applied direct to the fade out edge offering a high quality finish to the fade out process.

     

  • MAXMEYER® Spot Blender Can 5421

    Product Code: 1.912.5421

    A convenient solution to achieve a seamless finish on clearcoat and direct gloss fade-out edges.

     

    Features and Benefits

    1. Easy to use with very good wetting of the surface and fast flash off: Painter speed and confidence in
      the repair process
    2. Excellent melting of the overspray edge: Minimal polishing required, increasing productivity
    3. Ready-for-use: Applied direct to the fade out edge offering a high quality finish to the fade out process.

     

  • Plastic Cleaner 3660

    Product Code: 1.931.3660

    The Plastic Cleaner is a water miscible cleaning solution, which is designed to remove contaminants on plastic substrates. This ensures the best possible adhesion of the repair stopper or paint systems. 

    Use it when removing release agent from new plastic parts. 

     

    Features and Benefits

    1. Easy mixing ratio: The 1:1 mixing ratio creates easy mixing and increases throughput.