HP Epoxy Primer
Product Description
HP Epoxy Primer is a 2-pack primer-filler with good anti-corrosion properties. It is extremely fast drying when used as sealer or surfacer and offers very good adhesion to a wide variety of substrates, including aluminium, galvanized steel and GRP. It can also be directly recoated with polyester stopper, after drying and sanding.
It is mainly used in wet on wet systems but can be baked and flatted if required.
Product Code: 1.855.9900
Application Process
   |
Mixing Ratio by Volume HP EPOXY PRIMER HP EPOXY HARDENER THINNER |
SANDABLE SURFACER 1 1 na |
WET ON WET 1 1 na |
SEALER SURFACER 1 1 na |
   |
Pot Life |
16 hours @ 20° C |
16 hours @ 20° C |
16 hours @ 20° C |
|
|
Viscosty-DIN4 20° C. |
17" |
17" |
17" |
|
|
Spray gun set up |
1,4 - 1,8 mm. |
1,4 - 1,8 mm. |
1,4 - 1,8 mm. |
|
|
Number of Coats |
2 - 4 |
2 - 4 |
1 full |
|
|
Drying times Through dry @ 20° C. Through dry @ 60° C. |
4 hours 30 minutes |
na na |
na na |
|
|
For additional information, consult technical data sheet 299. |
|||
