HP Wet on Wet Primer

Product Description

A fast drying 2K® Wet-on-Wet undercoat designed for use as a single visit application under AQUAMAX® waterborne basecoat / UHS DURALIT® Extra topcoats. Available in three multigrey shades it delivers both excellent opacity along with optimum holdout of topcoat. Products are not suitable for use under MAXICAR® basecoat and Duralit direct gloss topcoats.

 

Features and Benefits

  1. Extremely fast drying: Topcoat can be applied after 15 – 20 mins air dry, helping to increase the throughput in your Bodyshop.
  2. Multi-Grey capability: These primers can be mixed to give you the correct grey shade for your topcoat colour to create material savings for the Bodyshop.
  3. No need for sanding: 1 full coat will protect the ecoat and also give you a smooth surface to apply your topcoats straight onto, without any need for sanding. Helping to improve throughput and energy saving costs.
  4. Quality denib at 20 minutes: Making it easy to remove dirt inclusions and helping to offer an excellent final appearance.

 

Product Code: 1.841.8004

MaxMeyerMidTier_Undercoat_HP-Wet-on-Wet-Primer_3L.png
TDS MSDS

Application Process

 

Mixing Ratio by Volume / Weight

HP WET ON WET PRIMER 

HARDENER

THINNER

 

1000 / 1000 

250 / 161

300 / 188
 

Pot Life @ 20º

30 - 45 minutes

Viscosty-DIN4 20° C.

16 - 18 seconds

Spray gun set up

1.4 - 1.6 mm.

Number of Coats

1 full coat or 1 double coat

AIR DRYING

Interval between coats

Flash-off before applying topcoat

Ready for sanding (at 25 microns, 20° C.)

 

 

none

15 - 20 minutes                                   

Light de-nibbing can be carried out after 20 minutes

 For additional information, consult technical data sheet 253V.